Electric screw press is a sort of forging machine with sturdy applicability, have twin nature of press and forging hammer screw press for sale. The utility model relates to an electrical screw press suitable for processing refractory bricks or being used for forging and stamping.
Because the slide pace reduction motion of a slide after the acceleration is feasible by direct drive whereas the friction driven type is unimaginable, the processing time for one cycle will almost not differ for forging a small work with giant press which brings out the epoch-making results of “The Larger Embraces the Much less”.
Sturdy structure of motor rotor, which can withstand impacting load, locked rotor and phase cannot burn the controller and motor. eight. Electric screw press can show striking power, to guard machine harm from overload. High energy ranges available for every blow result in a smaller screw press doing the same work of a a lot larger eccentric press (1.3 to 1.6 times bigger eccentric press is required).
2. Idiot-fashion operation, no need of professional press machine operator. 2. Electric screw press is appropriate for all types process of precision forging, finishing, coining, embossing and leveling etc. All screw presses in the present day are built with the screws in a horizontal configuration.
For instance, it includes midway stop during slide ascending, restart, forging, slide return, knockout and materials insertion with slide pullup a little bit excessive, etc. In the course of the working stroke of the spindle 9, i.e. the downward movement of the slide 7, the flywheel 17 is accelerated by the drive till it reaches the preselected rotational pace, i.e. has accumulated the power required for the forging course of.
Not like a hammer, the blow of a screw press is precisely controllable over a large vitality vary. The highest oil extraction ratio (OER) of 17.ninety% and oil extraction efficiency (OEE) of 79.56% have been obtained at the sterilization time of 60 min, digestion time of 10 min and screw speed of 10 rpm.
Background expertise has processing refractory brick or is used for the friction press of forging, punching press use, is to lean on motor to be with movable slider to maneuver up and down in frame by flat wheel of vertical wheel friction, and the article on the support lower platform is hit.Because vertical wheel peace wheel rubs for a very long time, accessory loss is large, fault price is excessive, and the facility consumption of motor long time continuous working is excessive, and Synthetic Management operates, and assault precision is also poor.